Commercial Applications

Aquaco grey water recycling systems have been installed in offices, warehouses, retail centres and hotels. All commercial projects could benefit from an Aquaco grey water or rainwater system:

  • The Aquaco Multi-Media System is the lowest cost, large scale greywater recycling system available.
  • The Aquaco MBR System offers some of the highest treated water quality on the market, and is the most cost effective MBR system in the UK.
  • Both grey water systems have small the smallest footprints on the market and are highly effective and efficient.
  • Gain essential BREEAM points towards planning permission.

A typical multi-media greywater system would include

  • An Aquaco pre-filter.
  • A small pre-treatment tank, with aeration tubes (volume equal to 1 hour’s filtration flow rate).
  • Afully packaged Multi-Media filtration skid (including filter feed, filter backwash, and aeration pumps, NaClO dosing, filtration vessel, and system control panel.
  • A post-treatment (clearwater) tank (normally sized to 1 day’s demand).
  • Float switches.
  • A packaged AMCU booster set with integrated mains water top-up and automatic switch over in the event of poor water quality.
  • Pressure vessel.
  • UV disinfection module if being used in a spray application.

A typical MBR grey water system would include:

  • An Aquaco pre-filter.
  • A settlement tank (on larger systems above approx. 6,000 LPD).
  • An aeration tank.
  • An MBR tank (or tanks depending on system size).
  • Aeration pumps and permeate pumps (integrated into the MBR tanks).
  • A clear water tank.
  • Control panel with remote monitoring facility.
  • Float switches
  • A packaged AMCU booster set with integrated mains water top-up and automatic switch over in the event of poor water quality.
  • Pressure vessel.
  • UV disinfection module if being used in a spray application.

Read more about Aquaco Multi-Media System

Read more about Aquaco MBR System